KEMMER Router Bits Products

Chip Breaker Routers (CMF)

Tungsten carbide high performance chip breaker routers
0.50 – 3.175 mm.

Chipbreaker router, right hand cut, right hand primary flutes (up-cut), fishtail type end cut.
Optimized geometry and tungsten carbide results in longer tool life and high quality surface finish.

Designed for superior edge finish.

Specification

d (mm)	θ ( ° )	Artikel - Nr. Part number
0.50	3.0	CMFBM 0500 030
0.60	3.0	CMFBM 0600 030
0.70	3.0	CMFBM 0700 030
0.80	4.5	CMFBM 0800 045
0.90	4.5	CMFBM 0900 045
1.10	6.0	CMFBM 1100 060
1.20	6.0	CMFBM 1200 060
1.30	6.0	CMFBM 1300 060
1.40	6.0	CMFBM 1400 060
1.50	6.0	CMFBM 1500 060
1.60	7.5	CMFBM 1600 075
1.70	7.5	CMFBM 1700 075
1.80	7.5	CMFBM 1800 075
1.90	7.5	CMFBM 1900 075
2.00	9.0	CMFBM 2000 090
2.10	9.0	CMFBM 2100 090
2.20	9.0	CMFBM 2200 090
2.30	9.0	CMFBM 2300 090
2.40	9.0	CMFBM 2400 090
3.00	9.0	CMFBM 3000 090
3.175	9.0	CMFBM 3175 090

Order Now

Countersink Router (MCD)

Solid Tungsten carbide countersink

60° - 150° point angle

Specification

d (mm)	θ ( ° )	Artikel - Nr. Part number
6500	60	MCDAM 6500 060
6500	75	MCDAM 6500 075
6500	90	MCDAM 6500 090
6500	120	MCDAM 6500 120
6500	140	MCDAM 6500 140

Other point angles on request.

Order Now

Diamond Cut Routers (DMF,DCF)

Tungsten carbide router high performance diamond cut routers (DMF)

0.60 - 3.175 mm.

Diamond cut routers, right hand cut, right hand primary flutes (upcut), fishtail type end cut. Prefered for peripherical contours.

d (mm)	θ ( ° )	Artikel - Nr. Part number
0.60	3.0	DMFBM 0600 030
0.70	3.0	DMFBM 0700 030
0.80	4.5	DMFBM 0800 045
0.90	4.5	DMFBM 0900 045
1.00	4.5	DMFBM 1000 045
1.10	6.0	DMFBM 1100 060
1.20	6.0	DMFBM 1200 060
1.30	6.0	DMFBM 1300 060
1.40	6.0	DMFBM 1400 060
1.50	6.0	DMFBM 1500 060
1.60	9.0	DMFBM 1600 090
1.70	9.0	DMFBM 1700 090
1.80	9.0	DMFBM 1800 090
1.90	9.0	DMFBM 1900 090
2.00	9.0	DMFBM 2000 090
2.10	9.0	DMFBM 2100 090
2.20	9.0	DMFBM 2200 090
2.30	9.0	DMFBM 2300 090
2.40	9.0	DMFBM 2400 090
3.00	9.0	DMFBM 3000 090
3.175	9.0	DMFBM 3175 090

Other diameters, flute lengths and point geometry available on request.

Specification

Tungsten carbide highest performance diamond cut routers (DCF)

1.0 – 2.4 mm

Coarse diamond cut routers, right hand cut, right hand primary flutes (up-cut), fishtail type end cut. The new geometry results in longer tool life at higher feed rates. Preferred for peripherical contours particularly of abrasive base materials (e.g. halogen-free base material).

d (mm)	θ ( ° )	Artikel - Nr. Part number
1.00	6.0	DCFBM 1000 060
1.60	7.5	DCFBM 1600 075
2.00	9.0	DCFBM 2000 090
2.40	9.0	DCFBM 2400 090

Other point angles available on request.

Order Now

Single Flute Routers (SFD)

Tungsten carbide single flute routers

0.80 – 2.4 mm.

Single flute routers with a special geometry designed for routing soft materials like Teflon, flexible boards etc.

Specification

d (mm)	θ ( ° )	Artikel - Nr. Part number
0.80	4.0	SFDAM 0800 040
1.00	4.0	SFDAM 1000 040
1.20	5.0	SFDAM 1200 050
1.60	5.5	SFDAM 1600 055
2.00	9.5	SFDAM 2000 095
2.40	9.5	SFDAM 2400 095

Other diameters and flute lengths available on request.

Order Now

Two Flute End Mills Coated Tungsten Carbide Router (DLC)

DLC coated tungsten carbide highest performance two flute end mills
Diameter 1.60-2.40 mm.

Two flute end mills, right hand cut, right hand primary flutes (up-cut), drill point type end cut.

Advantages of DLC coating:

· Extremely close contours coating of sharp edges

· Excellent abrasion resistance

· High toughness at very high hardness

· Low tendency to built-up edge

· Extremely smooth surface to frictionless chip evacuation

EDDAC end mills allows higher tool life, higher feed rate and excellent surface quality. Are best suited for the machining of Aluminum Clad Substrates (IMS).

Specification

d (mm)	θ ( ° )	Artikel - Nr. Part number
1.60	6.0	EDDAC 1600 060
2.00	6.0	EDDAC 2000 060
2.40	6.0	EDDAC 2400 060

Other diameters, flute lengths and point geometry available on request.

Order Now

Two Flute End Mills Router (TFF,TSF)

Tungsten carbide highest performance two flute end mills (TFF)

0.50 - 3.175 mm.

Two flute end mills, right hand cut, right hand primary flutes (up-cut), fishtail type end cut.

Two flute end mills are best suited to the machining of soft materials, flexible boards, aluminum, plastic etc. and fulfill high quality requirements.

d (mm)	θ ( ° )	Artikel - Nr. Part number
0.50	3.0	TFFAM 0500 030
0.60	3.0	TFFAM 0600 030
0.70	3.0	TFFAM 0700 030
0.80	4.5	TFFAM 0800 045
0.90	4.5	TFFAM 0900 045
1.00	4.5	TFFAM 1000 045
1.10	6.0	TFFAM 1100 060
1.20	6.0	TFFAM 1200 060
1.30	6.0	TFFAM 1300 060
1.40	6.0	TFFAM 1400 060
1.50	6.0	TFFAM 1500 060
1.60	7.5	TFFAM 1600 075
1.70	7.5	TFFAM 1700 075
1.80	7.5	TFFAM 1800 075
1.90	7.5	TFFAM 1900 075
2.00	9.0	TFFAM 2000 090
2.10	9.0	TFFAM 2100 090
2.20	9.0	TFFAM 2200 090
2.30	9.0	TFFAM 2300 090
2.40	9.0	TFFAM 2400 090
3.00	9.0	TFFAM 3000 090
3.175	9.0	TFFAM 3175 090

Other diameters, flute lengths and point geometry available on request.

Specification

Tungsten carbide highest performance two flute end mills (TSF)

1.0 – 2.4 mm.

Solid tungsten carbide two flute end mills, right hand cut, right hand sharp primary flutes (upcut), fishtail type end cut.

The new geometry produces excellent surface quality. It is best suited to the machining of soft materials: flexible boards, Teflon etc. and fulfill highest quality requirements.

d (mm)	θ ( ° )	Artikel - Nr. Part number
1.00	4.5	TSFAM 1000 045
1.60	7.5	TSFAM 1600 075
2.00	9.0	TSFAM 2000 090
2.40	10.5	TSFAM 2400 105

Other diameters, flute lengths and point geometry available on request.

Order Now

Vee-groove Router (RFD)

Solid tungsten carbide vee-groove router 22° - 90°

Vee-groove routers designed to score grooves in to the surface of PCB to allow for ease of image separation

Specification

d (mm)	θ ( ° )	Artikel - Nr. Part number
3175	22	RFDAM 3175 022
3175	30	RFDAM 3175 030
3175	45	RFDAM 3175 045
3175	60	RFDAM 3175 060
3175	90	RFDAM 3175 090

Other point angles available on request.

Order Now